FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

No special club to join... just great low prices every day.
HOME
CONTACT
SITEMAP
SPORTSTER

Cams & Cam Side Parts for Sportster

Cams for Twin Cam Engines can be found HERE

Cams for Big Twin & other engines can be found HERE

Sportster cams from Andrews.  Evo and Ironhead Sportsters.

Sportster Cams

ANDREWS CAM AND GEAR SETS FOR SPORTSTER

A camshaft upgrade is the most logical step after air filter, exhaust, carburetor, and ignition system improvements have been made. It will improve mid and upper-end power. All camshafts listed are ground with stock size base circle and can be used with stock push rods. Instructions included. Made in U.S.A.

1) IRONHEAD SPORTSTER 1957/1980: Street 900/1000: Great mid-range and upper end power. Biggest cam available for no head work installation. Can use stock springs, need 9:1 or higher compression, 1982 engines may require spring spacing. Special requirements: bolt-in. Power range: 2000/7000 RPM. Cam Grind: Y. Fits Ironhead Sportster 1957/1970.

Model Year Part # Price Add to cart
1957/1970 M66882 $396.63
1971/1980 M66883 $378.43

Cam Specs for Ironhead Sportster with stock 1.43:1  rocker arm ratio.

2)EVOLUTION SPORTSTER 1986/2003 SEE CHART BELOW:

Description Special Requirements Power Range Cam Grind Model Year Part # Price Add to cart
For stock 883cc, 1100cc or 1200cc engines. More duration and lift means extra power. Stock springs and lifters can be used. Special requirements: bolt-in. Power range 2000/6000 RPM. Cam Grind V2. Fits Evolution Sportster 1986/Later bolt-in 2000/ 6000 RPM V2 1986/ 1990 M66891 $296.30
N2 1991/ 1999 M66892 $296.30
N2 2000/ 2003 M66844 $296.30
Street/Drags: stock or modified 883cc, 1100cc or 1200cc engines. Results in slightly higher idle speed. Special requirements: valve/spring clearance. Power range 2000/6000 RPM. Cam Grind V4. Fits Evolution Sportster 1991/1999. valve/spring clearance 2000/ 6000 RPM N4 1991/ 1999 M66894 discontinued   ---
N4 2000/ 2003 M66845 $296.30
Modified 1100cc, 1200cc, stroked 883cc engines with stock springs and hydraulic lifters. Special requirements: valve/spring clearance. Power range 2000/6500 RPM. Cam Grind V8. Fits Evolution Sportster 1991/1999. valve/spring clearance 2000/ 6500 RPM N8 1991/ 1999 M66896 $296.30
N8 2000/ 2003 M66846 $296.30

Cam Specs for Evo Sportsters with stock 1.625:1 rocker arm ratio.

MORE SPORTSTER ENGINE PARTS CAN BE FOUND HERE

Gear case bushing rebuild kit for  Sportster motorcycles.

 

GEAR CASE BUSHING REBUILD KITS FOR SPORTSTER - HARDWARE

Complete cam/gear cover and case bearing/bushing rebuild kits for all Sportster models. Made in the U.S.A.

Part #: 64606 - Fits Sportster 1957/1976
Contains the following:
5 Bushing Pins (Replaces HD# 275), 6 Cam Shims (Replaces HD# 6769), 4 Needle Bearings (Replaces HD# 9057), 3 Cam Bushings (Replaces HD# 25586-37), 2 Idler Gear Bushings (Replaces HD# 25597-57), 2 Cam Gear Plates (Replaces HD# 25551-58), 1 Pinion Bushing (Replaces HD# 25593-57), 1 Rear Cam Bushing (Replaces HD# 25588-57)
... $100.34

Part #: 64607 - Fits Sportster 1977/1985
Contains the following:
5 Bushing Pins (Replaces HD# 275), 4 Cam Shims (Replaces HD# 6769), 4 Needle Bearings (Replaces HD# 9057), 3 Cam Bushings (Replaces HD# 25586-37), 2 Idler Gear Bushings (Replaces HD# 25597-57), 2 Cam Gear Plates (Replaces HD# 25551-58), 1 Pinion Bushing (Replaces HD# 25593-74), 1 Rear Cam Bushing (Replaces HD# 25588-57)
... $100.34

Crank Position Sensor  for Harley-Davidson motorcycles.
CRANK POSITION SENSOR - V-FACTOR

Top quality crank position sensor.
Often overlooked electrical wear item.

Part #: 66003 - Fits Touring Models, Softail & Dyna 2001/Later & Sportster 2006/Later
Replaces HD# 32707-01C ... $77.20

 

Cams for Twin Cam Engines can be found HERE

Cams for Big Twin & other engines can be found HERE

.

Engine Section

Sportster Section

Secured by SSL - an authentic COMOCO site.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

PLEASE NOTE: We Do NOT Backorder. If your item is not in stock, you will be notified and given a refund.

We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

 

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2017 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

All-Over-Print

Protected by Copyscape Duplicate Content Detection Software

 American Made Leathers to Last a Lifetime! FoxCreekLeather.com

Free Shipping! Necklaces, Earrings, Bracelets, Rings, Brooches, etc at SammyDress.com! 

Motorcycle Eyewear