SINGLE FIRE DUAL PLUG IGNITION COIL FOR AFTERMARKET IGNITIONS - DYNATEK TWIN-FIRE


Raising the performance standard, state of the art technology makes the single fire dual plug DYNATEK "Twin Fire" Hi-Performance Ignition Coil a perfect complement to our Dyna 2000 or our Dyna 2000i ignition module. Saving space by incorporating two individual performance ignitions coils into one package, the "Twin Fire" coil mounts in the OE location and can be used with one of the special coil cover mounts. This high performance ignition coil is designed for heads that have been converted to use two spark plugs per head. Fits all models with aftermarket single fire ignition modules that incorporate an electronic advance system and requires a 3 OHM coil. Fits Big Twin 1970/1999 (except TC 88 & EFI) and Sportster 1971/2003 (except 1200S). Instructions included. Made in the U.S.A.
" DYNATEK" 3 OHM. Ignition coil. Part#:MU16069 ... $167.92 including shipping*

NOTE: Due to the shape of the DYNATEK "Twin Fire" Coil, a special coil cover mount must be used to retain the OE style coil cover. Fits Softail and FXR models as shown. Coil covers are not included. 'DYNATEK' Fits Softail 1984/1999. OPTIONAL CHOICE WHEN YOU PUT MU16069 IN YOUR CART Part#:MU16103 ... $11.18 including shipping*

Options:

Dynatek 3ohm ignition coil $167.92 Coil and Coil Cover Mount $179.10

SINGLE FIRE COIL FOR AFTERMARKET IGNITIONS - DYNATEK TWIN FIRE II

At last, a high output single fire ignition coil that fits in the OE location and can be used with an OE style coil cover. This Twin Fire II coiled by DYNATEK will produce up to 40,000 volts per secondary output and has a peak gap current in excess of 50 milliamps. It can be used with 7 or 8mm spark plug wires and features a high impact thermoplastic housing with cooling fins. The primary terminals and nuts are machined from solid brass for a good transfer of electricity. Fits Big Twin and Sportster with aftermarket single fire ignitions that require a 3 OHM coil. Made in the U.S.A. Part#:MU16070 ... $160.47 including shipping*

'SUPER COILS' FOR BIG TWIN AND SPORTSTER - ACCEL


Accel's Super Coils are designed to assure maximum available spark energy, fast coil rise time, and produce a 30,000-volt output. The OEM coil produces approximately 20,000 volts making the newly installed Super Coil yield instant power gains. Using the late model OEM configuration for easy bolt on installation, the Super Coils are designed for either electronically or point fired Harley-Davidson V-Twins. The custom finned cap serves as a voltage dam to prevent arcing and flashover. The two versions of Super Coil both carry a lifetime replacement warranty with state of the art internal components.

'ACCEL' 4.7 OHM fits 12 Volt Points. Triggered Ignitions 1965/1979. (Rpls. HD 31609-65A) Made in U.S.A. Part#:MU16027 ... $108.82 including shipping*

'SUPER COIL' KIT FOR 12 VOLT MODELS - ACCEL

This is the most powerful coil that Accel builds for Harley-Davidson applications. Its extremely high output requires the use of our severe duty Accel 8.8 carbon core silicone jacketed racing spark plug wires. This kit is complete with two Accel 8.8 ignition wires and appropriate chrome brackets, hardware, and installation instructions. This 3 OHM dual fire Accel Super Coil was designed exclusively for use with Harley-Davidson ignition systems and is completely compatible with all 12 volt points or electronic systems 1965/1999 models. Made in the U.S.A.

Part#:MU16006 ... $123.08 including shipping*

SINGLE FIRE SUPER COIL FOR AFTERMARKET IGNITION - ACCEL

3 OHM.
65,000 volts (45% higher than OEM coil).
Mounts in stock location.
Designed for single spark plug per head applications.
Can be used with aftermarket ignition systems that incorporate a mechanical advance.
Note: Will not fit models with OEM single fire ignitions such as Electronic Fuel Injection, Twin Cam 88, or 1200 Sportster Sport. Made in U.S.A.

Part#:MU16073 ... $137.34 including shipping*

'POWER PULSE' COIL FOR BIG TWIN AND SPORTSTER - ACCEL


Power Pulse 12-volt 4.2 OHM coil features greater available spark voltage, faster rise time and longer spark duration than OEM coils. Molded in bright yellow impact resistant thermoplastic compound, this Accel coil is guaranteed to improve starting, midrange throttle response and top-end performance on points-triggered or Prestolite electronic ignition Harleys. A potent combination when teamed up with our Super Plate, Accel 8.8 ignition wires, and U-Groove spark plugs. Replaces Big Twin & Sportster molded style coils 1965/1983. Made in U.S.A.

Part#:MU16007 ... $105.96 including shipping*

DUAL FIRE 'HIGH INTENSITY' COILS FOR ELECTRONIC IGNITION - Crane Cams

These dual tower 30,000 plus volt output coils were designed to work in conjunction with and to optimize the output of Crane HI-4 ignition systems. They can be used with any 12-volt OEM or aftermarket electronic ignition system that requires a minimum of a 2 to 3 OHM coil. These coils mount in the stock location and work with most 12-volt electronic ignition models.
" CRANE CAMS" 2.8 OHM. Fits Big Twin 1970/1999 (except EFI & TC 88) and Sportster 1971/Later (except 1200s).

Note: These coils are not designed for use on TC88", EFI or Sportster 1200S OEM single fire ignition systems.

Prices include shipping*

Description	Part #	Price	Buy Now
Dual Fire, OE Style, 2.8 OHM (Rpls HD31614-83A) Made in USA	MU16050	102.59
Dual Fire, 3.0 OHM	MU16056	102.59

MU16057

'HIGH INTENSITY' COILS FOR ELECTRONIC IGNITION - Crane Cams

These dual tower 30,000 plus volt output coils were designed to work in conjunction with and to optimize the output of Crane HI-4 ignition systems. They can be used with any 12-volt OEM or aftermarket electronic ignition system that requires a minimum of a 2 to 3 OHM coil. These coils mount in the stock location and work with most 12-volt electronic ignition models. Made in U.S.A.
" CRANE CAMS" 3.0 OHM. Fits all seat post mounted coils on FL 1970/1999, FX 1970/1999, and Softail 1970/1999 (except EFI & TC 88) as well as custom fitments. Part#:MU16057 ... $163.14 including shipping*

MINI COILS FOR CUSTOM USE - Daytona Twin Tec

Compact size of these coils makes them great for custom applications.
Body measures 1 7/8" long x 1 1/2" wide x 1 1/2" high.
Mounting ears are metal reinforced for strength and mount on 1 1/4" centers.
Spiral core suppression spark plug wires are designed to be cut to length for exact fitment.
Instructions included. Made in the U.S.A.

Part#:MU16075 - Fits Big Twin & Sportster with Aftermarket single fire ignitions that require 3 OHM Coils ... $118.70 including shipping*

BILLET DUAL COIL MOUNTING KITS FOR SOFTAIL MODELS - V-Factor

These billet chrome plated Dual Coil Mounting Kits will give your high performance ignition system a sharper image. CNC-machined from aircraft quality aluminum, these mounts are designed for the DYNATEK end mount style single or dual tower coil system and are complete with all necessary mounting hardware. In addition, the Softail mounting kit includes a chrome plated, heavy duty steel top motor mount. Fits Softail 1984/1999.

Part#: MU16167 ... $154.62 including shipping*