FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

No special club to join... just great low prices every day.
HOME
CONTACT
SITEMAP
SPORTSTER
Electrical Related

Electreical Terminal Box kit for Harley Big Twin Motorcycles and 45ci.

Made in the U.S.A. Made in America.

ELECTRICAL TERMINAL BOX ASSEMBLY FOR BIG TWIN & 45CI - Colony

This quality reproduction of the OE terminal box assembly is available preassembled, painted black and ready to install
It is properly insulated to eliminate grounding and includes all necessary mounting hardware
The installation of this box and a new wire harness is a must when restoring an early model electrical system
Colony, Made in the U.S.A.
Part #: M12009 - Fits Big Twin and 45CI 1948/1969. Replaces HD# 72325-48 ... $52.68

Wire Plus motorcycle switch module  for 4 buttons.

Made in the U.S.A. Made in America.

FOUR BUTTON SWITCH MODULE FOR CUSTOM USE - Wire Plus

Dramatically cleans up your handlebars.
Four momentary contact switches operate everything.
Controls starter, hi-low (with dimmer relay), turn signals (with auto cancel) & horn (depress both turn signal buttons at same time to operate horn).
Diagnostic LED lights up with each press of a button to tell you it's working.
All wires splice into your harnes.s
Designed with through bolt hole for mounting.
Waterproof design.
2.125" long x 1.750" wide x .688" deep
Instructions included. Made in the U.S.A.

Part #: M15149 - Wire Plus Remote Mount Accessory Module. Four button Switch Module operates start, hi-low, horn & auto cancel turn signals with momentary contact switches; depressing both turn signal buttons at the same time operates the horn ... $180.00

Wire Plus motorcycle  lighting control  module.

Made in the U.S.A. Made in America.

LIGHTING CONTROL MODULE FOR CUSTOM USE - Wire Plus

Any marker lights (including LEDs) run as auto cancel turn signals, running lights and flashing brake lights.
Existing tail & license light may run separate or incorporate flashing brake function.
Designed with through bolt hole for easy mounting.
Waterproof design.
Module measures 2.063" long x 1.625" wide x .490" thick.
Instructions included. Made in the U.S.A.

Part #: M15148 - Wire Plus Remote Mount Accessory Module. Lighting Control Module controls any marker light (including LEDs) to run as auto cancel turns, running lights & flashing brake lights.
Existing tail & license light may be run separate or incorporate flashing brake function... $119.99

Wire Plus high low dimmer switch for custom motorcycles.  Made in America.

Made in the U.S.A. Made in America.

PUSH BUTTON TYPE HIGH-LOW DIMMER SWITCH MODULE FOR CUSTOM USE - Wire Plus

Eliminates rocker type high-low switch converting it to use a single action (momentary contact) button.
Great for choppers where the OE type switch housings are not used.
Designed with through bolt hole for easy mounting.
Waterproof design.
All wires splice into left handlebar harness & include up to 52" of lead wire.
Module measures 1.250" long x 1.000" wide x .625" thick.
Features LED function light for troubleshooting.
Instructions included. Made in the U.S.A.

Part #: M15147 - Wire Plus Remote Mount Accessory Module. High/Low Switch Module allows a single button like 15100 to be used as a dimmer switch... $49.99
Turn Signal module with load equalizer for HD motorcycles.
SELF-CANCELLING TURN SIGNAL MODULE WITH LOAD EQUALIZER - Wire Plus

12 volt solid mount state.
Provides timed self-cancelling. By pushing the turn signal button, the self-cancelling function will operate the signal for 10 seconds and then turn off automatically. Pushing the button again will cancel the timing process. By pushing the other side's turn signal button, the timing process will be cancelled on one side and started on the other side.
Supports the four way flasher function.
Equalizes the load without producing excessive heat.
Allows any wattage combination of turn signal from single low draw LED cluster style bulbs up to high draw 60 watt bulbs.
Allows for the use of front only or rear only turn signals.
Does not require the OEM speedometer reed switch.
2 1/8" long x 1 3/4" wide x 1/2" tall.
Includes instructions. Made in the U.S.A.

Part #: M15138 - Wire Plus. Fits all models with 12 volt turn signals.
Note: Can also be used to replace the OEM turn signal module on Big Twin 1989/2000 & Sportster 1991/2003 ... $99.99

Hidden Electronic Antenna kit for motorcycle radio from Dakota Digital.
HIDDEN ELECTRONIC ANTENNA KIT FOR AM/FM RADIO - Dakota Digital

Replaces the OE mast type external antenna.
Receives radio signal even when hidden behind fiberglass or plastic.
Includes 3 feet of antenna lead wire with standard size male jack.
Totally sealed housing measures 3 1/2" long x 3/4" wide.
Requires connection to 12 volt switched power source (power with key on).

Part #: M14209 - Dakota Digital. Fits 12 volt models ... $79.96

 

Made in the U.S.A. Made in America.

BRAIDED COVER FOR CUSTOM USE - NAMZ Custom Cycle Products

Versatile metal covering can be used over fuel line, oil hose, electrical wires or control cables.
The cover can easily be pulled tight and the ends secured with heat shrink tubing (not included, see below).
NAMZ Custom Cycle Products - Made in the U.S.A.

Part #: M49844 - Braided Copper, 25 foot roll, 1/8" Minimum I.D. x 1/2" Maximum I.D. ... $67.35

Part #: M49842 - Braided Stainless Steel, 25 foot roll, 1/8" Minimum I.D. x 1/2" Maximum I.D. ... $83.30

Part #: M49843 - Braided Stainless Steel, 25 foot roll, 3/8" Minimum I.D. x 3/4" Maximum I.D. ... $89.70

Made in the U.S.A. Made in America.

CLEAR HEAT SHRINK TUBING FOR CUSTOM USE - NAMZ Custom Cycle Products

Multi-purpose clear heat shrink tubing can be used over braided stainless steel to help prevent chafing of the braid when it touches other parts
Great for electrical work
Shrinks to half its size when heated for a snug fit
For best results use heat gun
Made in the U.S.A.

Part #: M12095 1/4" I.D., 25 foot roll ... $83.30

Part #: M12096 - 5/16" I.D., 25 foot roll ... $83.30

Part #: M12097 - 3/8" I.D., 25 foot roll ... $83.30

Part #: M12098 - 1/2" I.D., 25 foot roll... $83.30

Part #: M12099 - 3/4" I.D., 25 foot roll... $83.30

HEAT SHRINK BUTT CONNECTORS WITH BUILT-IN SOLDER JOINT - HARDWARE

Provide a soldered joint covered by a water tight heat shrink tubing.
Requires a minumum of 350°F to activate the solder.

Part #: M12327 - 12-10 wire gauge, yellow color code, Package of 25 ... $35.00

Part #: M12326 - 16-14 wire gauge, blue color code, Package of 25 ... $35.00

Part #: M12325 - 20-18 wire gauge, red color code, Package of 25 ... $35.00
ELECTRICAL TERMINAL KIT FOR CUSTOM WIRING - HARDWARE

Professional quality kit includes 430 pieces of the most commonly used terminal and includes a USA made multi-purpose crimp/stripping tool.
All terminals are solderless (crimp type) copper with an anti-corrosive zinc plating. They feature non-loosening nylon insulators that resist cracking when being crimped and also withstand extreme temperatures
To improve wire insertion all terminals (except the butt connectors) feature a tapered entrance that prevents wire strand peel-back.
The butt connectors are dimpled in the middle to prevent over insertion of the wire.
The included multi-purpose tool is designed to cut & strip wire, crimp insulated & non-insulated terminals and crimp spark plug wire terminals. It also shears 5 sizes of machine screws.
The metal storage box includes a curved bottom plastic divider for easy terminal removal and is conveniently marked with the manufacturers part number for easy replenishment. Box measures 9 1/2" long x 13 1/2" wide x 2" tall.

Part #: M12300- Complete Kit ... $136.60

FOR MODULES, ALSO SEE ELECTRONIC IGNITIONS, TURN SIGNALS. Electrical Section Index can be found here.

Secured by SSL - an authentic COMOCO site.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

PLEASE NOTE: We Do NOT Backorder. If your item is not in stock, you will be notified and given a refund.

We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

 

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2017 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

All-Over-Print

Protected by Copyscape Duplicate Content Detection Software

 American Made Leathers to Last a Lifetime! FoxCreekLeather.com

Free Shipping! Necklaces, Earrings, Bracelets, Rings, Brooches, etc at SammyDress.com! 

Motorcycle Eyewear