Specialty pages:

Sportster Section

Buell parts

V-Rod parts

Paugcho OE Style Frame for Road King (stock style)

• OE style 1994/2006 Road King frame.
• 26 degree rake.
• Use with Twin Cam or Evolution engines with matching touring model transmissions.
• Accepts all stock sheet metal, forks and suspension.
• Use our #MU2971 swing arm, sold separately.

#MU20221 - Road King frame with 26 rake ... $1796.36 including free shipping*

#MU29471 - Swing arm ... $284.55 including shipping*

BUY BOTH & SAVE:  MU20221_29471 ... $2060.91 including free shipping*

Kraft Tech Stock Width FXR-Style Frames made from 1-1/4 inch Tubing

Stock width frames made from 1-1/4 inch tubing with 1-1/2 inch tubing for the backbone. Frames are designed to accept the FXR-Style 5 speed transmissions, Big Twin forward controls, flatside Fatbob gas tanks, stock Big Twin fork cups and FXE style fender struts.

• #KW23080 - 30 degree rake and 0 inch stretch... $1033.15 including shipping*
• #KW23082 - 38 degree rake and 2 inch stretch... $1033.15 including shipping*

FXR-Style Frames made from 1-1/4 inch Tubing for 180 Width Rear Tires.

Kraft Tech FXR-Style Frames made from 1-1/4 inch Tubing for 180 Width Rear Tires.

FXR-Style Frames designed for 180 width tires. Comes complete with offset pivot blocks, wide axle, spacer, pulley spacer and necessary hardware. Allows you to run a 180 tire with the stock width drive belt. Frames accept Big Twin forward controls, swingarms use stock FXR caliper brackets and the gas tank mounts have already been welded in place to accept flatside gas tank mounts.

#KW23083 - 34 degree rake and 2 inch stretch & component kit... $1197.69 including shipping*  

#KW 23084 - 38 degree rake and 2 inch stretch & component kit... $1197.69 including shipping*  

#KW08012 - Raw finished wide swingarm for wide FXR-Style frame... $498.99 including shipping*       

FX & FL Swingarm Style Frames made from 1-1/4 inch Tubing for 180 Width Rear Tires.

Kraft Tech FX & FL Swingarm Style Frames made from 1-1/4 inch Tubing for 180 Width Rear Tires.

Replacement style frames designed for 180 width tires with 1-1/2" belt drive or 200 with tires with chain drive. These frames will accept 4 or 5 speed Softail type transmissions. The frame comes complete with mirror chromed swingarms and necessary hardware, the supplied fender struts accept 9" wide fenders and the gas tank mounts accept Softail-style flat side tanks.

#KW23002 - 30 degree rake and 0 inch stretch...$1213.15 including shipping*                                       

FX & FL Swingarm Style Frames made from 1-3/8 inch Mega Tubing for 180 Width Rear Tires

Kraft Tech FX & FL Swingarm Style Frames made from 1-3/8 inch Mega Tubing for 180 Width Rear Tires

Replacement style frames designed for 180 width tires with 1-1/2 inch belt drive or 200 with tires with chain drive. These frames will accept 4 or 5 speed Softail type transmissions. The frame comes complete with mirror chromed swingarms and necessary hardware, the supplied fender struts accept 9" wide fenders and the gas tank mounts accept Softail-style flat side tanks.

#KW23010 - 30 degree rake and 0 inch stretch... $1195.20 including shipping*                                       

Kraft Tech FX & FL Stock Width Swingarm Style Frames made from 1-3/8 inch Mega Tubing.

Replacement style frames designed to accept stock type swingarms (not included). These frames use a removable transmission plate (not included) designed to accept 4 speed transmissions. The gas tank mounts are for Softail-style flat side tanks and have already been welded in place.

#KW23117 - 30 degree rake and 0 inch stretch... $791.99 including shipping*                                       

#KW23118 - 34 degree rake and 2 inch stretch... $791.99 including shipping*                                       

Swingarm Style Frames for Big Twin 4 Speed, Standard Width - Hardbody by Kraft/Tech

Special Features:
1 1/2 inch O.D. Drawn Over Mandrel (DOM) 3/16 inch wall tubing for backbone strength.
1 1/4 inch O.D. x .120 inch wall tubing for down tubes and frame cradle.
TIG welded on all new hardened tooling for the most accurate fit possible.
Fully machined hourglass style neck.
Standard width.

Part#: MU20011 - OE Rake & Stretch ... $857.20 including free shipping*

Part #MU20012 - 34 inch Rake and 2 inch Stretch in front legs ... $857.20 including free shipping*

300 Wide Tire Fender & Swingarm Kit for 2000-Present Frames - Kraft Tech

"Bolt-on" kit with only minimal cutting required.  Kit includes Dagger style Swingarm made from 1-3/8" mandrel bent DOM steel tubing, 13.5" one piece 14 gauge deep drawn strutless fender, stainless steel splash guard for 88B 300 right side drive rear section, raw finish rear shorty belt guard, 1" rear axle and axle kit with chrome hidden axle cover plates and hardware. Made in the U.S.A.

NOTE:  Requires right side drive transmission or right side drive conversion of stock transmission.  This kit requires relocation of the tail light and license plate bracket and wiring.

Part#: KW23199 - 300 wide tire swingarm kit for 2000/L style frames ... $1279.00 including shipping*

#KW21044 - Polished stainless steel 4 quart oil tank for stock width, 180 and 200 width tire frames... $344.63 including shipping*

Kraft Tech frames are made of DOM steel, TIG/MIG welded, and frames will accept Evolution motors (except Twin Cam unless otherwise noted), Shovelhead & Panhead engines with clearance for cylinder up to 0.200" taller than stock Evolution. Made in USA. All frames come complete with manufacturer's Statement of Origin (MSO). Only frames listed as Kraft Tech are Kraft Tech.

Confused about frame terminology? See tech tip #9. See tech tip #10 for a rake and trail calculator. TECH TIP PAGE

You will receive a free catalog with your frame order, to help you with your bike building project. We will be glad to give you any assistance you need in choosing parts to fit.