Demon Bars - Detroit Bros Custom Cycles

• These 1" beach comber style bars were originally designed for the Green Demon bike.
• They are made of 1" O.D., .120" wall DOM steel.
• They measure about 36" tip to tip, and have a total pullback of about 3.5", though they measure 5" deep all in all.
• They also have 1" risers welded on, so you're all set!
• Raw Steel.
• Made in the U.S.A.

Part#: M41055 -Raw steel Demon Bars ... $244.55 including shipping*

APE HANGER HANDLEBAR FOR CUSTOM USE - by V-Factor

1 1/4" O.D. provides a hefty look.
Dimples at the switch area for use with any year handlebar controls.
Knurled at the riser area to help prevent slippage.
Designed for risers that mount on 3 1/2" centers.

Pre-drilled for internal wiring.

34 1/2" total width. 16" rise. 9" pullback. 9" center width.
Part#:M40018 ... $112.53 including shipping*

HIGHNOON HANDLEBARS FOR CUSTOM USE - V-FACTOR

1 1/4" O.D. Steel Handlebars provide a massive look with a style right out of the 1950's.
To keep the switch wires out of sight the bars have been dimpled like the 1982/later OE bars) and slotted under the switch housing area so the wires can be run internally.
The brake side has been clearanced to be used with OE style master cylinders (all years including 1996/later) and most custom brake master cylinders.
Knurled at the riser area to help prevent slippage.
Fits Risers mounted on 3 1/2" centers.

PRICES INCLUDE SHIPPING*

Width	Rise	Pullback	Center Width	Part #	Price	Buy Now
30"	12"	5 1/4	8 1/2"	M40024	$128.68
30"	16"	5 1/4	8 1/2"	M40025	$128.68

 "Beefy" Drag Riser Handlebars - 4, 6, or 8" High

At 1 1/4" O.D. these "Beefy" drag style handlebars will definitely change the look of your front end. The handlebars taper down to 1" so that conventional controls and grips can be used. To keep the switch housing wires hidden, the handlebars have been dimpled and drilled under the switch housing area and the wires are designed to exit near the bottom of the risers. Risers mount on 3 1/2" centers and use 1/2-13 mounting bolts. Designed for hydraulic brake switch blocks up to 1995 with external throttle cables. All "Beefy" handlebars are 28" total width with 6" total pullback. Available in 3 riser heights measured from the top fork bracket to the bottom of the cross bar. Prices include shipping*.

#M40079	4 Inches High	$160.99
#M40080	6 Inches High	$169.99
#M40081	8 Inches High	$169.99

Wiring can be run internally

Burly Handlebars from White Bros - Knuckle or Cruiser Styles

Give your bike the "Burly" look with a set of these oversize handlebars from White Brothers. The handlebars are 1 1/4" O.D. in diameter and feature conventional 1" Mounting and handlebar control area, wiring can be run externally or internally through pre-drilled inner slots and are dimpled for use with early or late controls. The "Burly" Knuckle Bars are slightly narrower than stock with a comfortable bend and slightly more pullback, while the "Burly" Cruiser Bars have just the right bend for maximum comfort and control. Fits most models with risers on 3 1/2" centers. Not designed for use with 1996/Later OEM Style controls.

#M40078 - Cruiser Style, Width 36", Rise 4", Pull Back 10 3/4" Center Width 13 3/4" ... $210.76 including shipping*

#M40077 - Knuckle Style, Width 33 1/2", Rise 5", Pull Back 12 1/2" Center Width 13" ... $210.74 including shipping*

BAR SNAKE, REDUCES VIBRATION

Pour-in Type

VIBRATION REDUCER FOR HANDLEBARS - Bar Snake

Designed to reduce the hand numbing effects from vibration that is naturally transmitted to the handlebars.
Made from a low-hysteresis polymer that can be installed by pouring it in the handlebar (cures in 4 hours).
Installation instructions included.

Pour in type vibration reducer. Fits handlebars with any I.D. up to 50" in length including ape hangers, multiple bend type or bars with internal wiring. Part#:MU41342 ... $71.75 including shipping*

Special Offer:  Order with Handlebars, save $10! ... $61.75 including shipping*

Options:

Ordered alone $71.75 Ordered with Handlebars $61.75