FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

No special club to join... just great low prices every day.
HOME
CONTACT
SITEMAP
SPORTSTER

Tailight and License Plate Mount Combos

Taillights only -- License Plate Mounts only (lighted and unlighted)

NEW!

Model A Style:

Model A style tailight with versatile side mount license plate holder.

'33 Ford Style:

'33 Ford style side mount taillight and license plate kit for motorcycles.

2" Bobber Style:

TC Bros Choppers 2 Inch Bobber Style Taillight with license plate mount.

Can be mounted Horizontally or Vertacally

Can mount license plate/taillight assembly horizontal or verticle.

Comes with 3 different style mount brackets

Includes 3 different mount brackets for welding to clamp, bolting to axle or shock.

 

Side Mount Taillight/License Plate Kits for Custom Use - TC Bros Choppers

  • Most versatile bracket on the planet.
  • Can be mounted horizontally or vertically on either side of bike.
  • Includes 3 different mount brackets for bolting to the axle, shock, or weld the included steel slug on the frame and clamp to it.
  • Brackets are powder coated gloss black.

Part#: M11263 - Model A style, Polished stainless housing with 12 volt bulb ... $99.99

Part#: M11267 - Model A style, Polished stainless housing with LED ... $139.99

Part#: M11264 - '33 Ford style, Polished stainless housing with 12 volt bulbs ... $99.95

Part#: M11265 - '33 Ford style, Black housing with 12 volt bulb ... $99.95

Part#: M11268 - '33 Ford style, Polished stainless with LED ... $139.99

Part #: M11269 - '33 Ford style, Black housing with LED ... $139.99

Part#: M11266 - 2" Bobber style, Black housing wih 12 volt bulb ... $74.99

New Skull Taillight and Licence plate mount for HD motorcycles and custom applications.

Back side view of skull tailllight and license plate mount assembly.

SKULL TAILLIGHT & LICENSE PLATE MOUNT FOR CUSTOM USE - V-FACTOR

Billet skull taillight, chrome plated.

Black license plate bracket.

LED lights with white for license area.

Part#: M11270 ... $66.01

Like SKULLS? Check out our SKULL PAGE!

 

Maltese Cross Tallight license plate mount combo for Softail
MALTESE LED TAILLIGHT/LICENSE MOUNTS FOR SOFTAIL & CUSTOM USE - V-FACTOR

CNC machined from billet aluminum.
Includes 43 super bright LED lights for the running and brake light function and 2 white LED lights that illuminate the license plate.
A 4" x 7" license plate will slide in from the bottom and is secured by two hidden set screws.
15" lead wires.
Taillight measures 2 1/4" wide x 2 1/4" tall x 1 1/4" deep.
Note: These taillights are not DOT approved and should be used accordingly.

Part #: M11244 - Chrome Billet Aluminum with Axle mount. Fits Softail 1986/1999 Custom Rigid frames that incorporate a Softail slotted style axle adjuster spacer. Mounts on left side and can be used with a 3/4" O.D. or 1" O.D. axle ... $208.49

Diamond LED taillight and license mount for Softail and custom use.

CHROME PLATED BILLET DIAMOND LED TAILLIGHT/LICENSE MOUNTS FOR SOFTAIL & CUSTOM USE

CNC machined from billet aluminum.
Includes 31 super bright red LED lights for the running light function and one white LED that illuminates the license plate.
A 4" x 7" license plate will slide in from the bottom and is secured by two hidden set screws.
15" lead wires.

Softail 1986/1999 & Custom Rigid frames that incorporate a Softail slotted style axle adjuster spacer. Mounts on left side of axle and can be used with a 3/4" O.D. or 1" O.D. axle.

Part#:M11238 ... $178.30

Verticle axle mount tailight and licnese plate mount assembly for Softail with LED.

Vertical Axle Mount Taillight/License Assy for Softail - LED

This heavy duty Chrome Plated Side Mount Assembly is manufactured from billet aluminum then show chromed for an unequaled look. The 20 LED lights emit a beacon that can't be missed by trailing traffic. The axle spacer/adjuster stop is incorporated into the license plate backing plate for a clean look and includes a special spacer that will allow for a 3/4" O.D. axle or a 1" O.D. axle. Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth boltless look. Fits Softail 1986/1999.
Vertical - Part#:M11229 - $189.90

Axle mount motorcycle taillight and license plate mount.

Motorcycle axle mount horzontal tallight and license plate  mount shown installed.

License plate slides in from the bottom and secures with hidden hardware.  Wires are hidden.

AXLE MOUNT HORIZONTAL TAILLIGHT/LICENSE MOUNT FOR SOFTAIL - V-FACTOR

Includes a special adapter that will allow for a 3/4" O.D. axle or a 1" O.D. axle.
The axle spacer/adjuster stop is incorporated into the license plate backing plate mount for a clean look.
Hidden allen head lock screws secure the license plate from the backside furnishing you with a smooth, boltless look.
Mounts on left side (replaces axle spacer adjuster stop).
20 red LED lights for high output and low draw.
CNC machined from billet aluminum.
Accepts 7" x 4" license plate.
Hidden wiring.
Note: Taillight assembly is not DOT approved and should be used accordingly.

Part #: M11228 Chrome Plated 12 volt LED style. License plate slides in from bottom. Fits Softail 1986/1999 ... $149.95

Motorcycle Fender Mount horizontal tallight license assy.  Hidden wires.

Fender mount horizontal tallight and license plate mount assembly shown installed on  rear fender.

License plate slides in from the bottom and secures with hidden hardware.  Wires are hidden.

FENDER MOUNT HORIZONTAL TAILLIGHT/LICENSE ASSEMBLY FOR CUSTOM USE - V-FACTOR

Hidden allen head lock screws secure the license plate from the back furnishing you with a smooth, boltless look.
Included is a rubber mounting block and hardware for a no hassle installation.
20 red LED lights for high output and low draw.
CNC machined from billet aluminum.
Accepts 7" x 4" license plate.
Hidden wiring.
Note: This taillight assembly is not DOT approved and should be used accordingly.

Part #: M11230 - Chrome Plated 12 volt LED style. License slides in from bottom. Fits flat or curved rear fender ... $165.40

License Plate / Tailight Mount for Touring motorcycles.

Mounting Plate shown in use with ty;e of backing plate  to be used.

LICENSE/TAILLIGHT MOUNT FOR TOURING MODELS - V-FACTOR

Designed to eliminate the OE vertical type stamped steel license mount and upgrade it to heavy duty 45° lay down type.
Mounts in the same location as the original on 4" centers.
Requires an aftermarket license holder with a flat backing plate with a three hole mount as shown in additional image.
CNC machined from billet aluminum for strength.

Part #: M13117 - Chrome Plated Mount. Fits FLT & FLH models 1997/Later ... $49.35

Teardrop Taillight with license plate mount for custom  choppers.
TEAR DROP TAILLIGHT/LICENSE MOUNT FOR CUSTOM USE - V-FACTOR

Vintage 1930's styling with today's quality manufacturing.
Die cast construction for strength and durability and show chrome plated.
Contoured backing with thick molded rubber gasket for smooth custom fenders.
Housing measures 6" long x 2 3/4" wide.
The taillight lens measures 2 1/2" long x 1 1/2" wide.
Includes license plate illumination lens.
Complete with mounting hardware.
Designed for 12 volt bulbs.
Note: This taillight is not DOT approved and should be used accordingly.

Part #: M11239 - Chrome Plated Assembly ... $47.05

Taillight and License mount kit for 7 inch fat bob  Harley-Davidson fenders.

M11218 & M19924

Led or bulb type taillight and license plate mount kit for 7 inch Fat Bob rear fenders.

M11216 & M19925

TAILLIGHT/LICENSE MOUNT KIT FOR 7" FAT BOB FENDERS - V-FACTOR

Your choice of a a standard duty mount or a heavy duty adjustable tilt mount.
Your choice of bulb type or LED (light emitting diode) type lighting for the taillight.
The bulb type uses a single automotive style #1157 or our 11801 incandescent dual contact bulb.
The LED type uses 60 red LEDs for the brake/running light function and 3 blue LEDs for the license illumination. LEDs are not affected by vibration or moisture and have an incredibly long life span. The LED lights do not produce any heat and draw only 6 watts of power as opposed to the 29.4 watts that the incandescent bulb draws.
These kits fit snugly under the fender and the taillight follows the contour of the fende.
Note: These taillight assemblies are not DOT approved and should be used accordingly.

Fits FXWG & FXST 1980/1999. Also fits standard width (7") custom Fat Bob style rear fenders, such as our M22004 or M22009.

Part #: M11218 - Chrome Plated Complete Bulb type Kit with Standard Duty Mount (.090" thick)... $55.00

Part #: M19924 Chrome Plated Complete LED type Kit with Standard Duty Mount (.090" thick) ... $119.40

Part #: M11216 Chrome Plated Complete Bulb type Kit with Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120" thick) ... $54.40

Part #: M19925 Chrome Plated Complete LED type Kit with Heavy Duty Mount with slotted mounting hole for adjustment of angle (.120" thick) ... $138.65

VINTAGE DRILLED TAILLIGHT FOR CUSTOM USE - HARDBODY

Vintage taillight with drilled aluminum lens ring adds a retro look to any bik.
Includes license plate bracket.

Part#:M11255 - Vintage Style Taillight; Uses standard # 1157 12 volt bulb ... $48.50

Original Equiptment Style Tallight License plat mount for FXWG, FXST Harley  motorcycles.
OE STYLE TAILLIGHT/LICENSE MOUNT ASSEMBLY FOR FXWG & FXST - V-FACTOR

Direct replacement.
Steel mount will also fit our M22004 rear fender.
Use with our OE style taillight M11210 found in the taillight section (bottom of page).

Part #: M13205 - Chrome Plated. Fits FXWG & FXST 1980/1999. Replaces HD# 59993-80A & 59993-80TA ... $55.40

 

LED Motorcycle Tailight and License plate light

LED tailight and license plate light shown installed on motorcycle.  Street Glow.

LED TAILLIGHT & LICENSE PLATE LIGHT - Street Glow

Slim design and multifunctional.
Red LED brake and running lights.
White LED license plate light.
Ultra-bright LEDs for greater visibility and safety.
Simple three wire connection.
Dual mount - can be installed with white LEDs up or down.

Part #: M13120 - Steet Glow Chrome Finished Light Casing.
Fits most state approved plates. 7 1/4" long x 9/16" wide x 1/2" height ... $39.99

Optional:

Optional small cateye taillight for license plate mount assembly for motorcycles.

Note: These taillight assemblies are not DOT approved and should be used accordingly

CATEYE SIDE MOUNT LICENSE BACKING PLATES & HINGE MOUNTS FOR CUSTOM USE - V-FACTOR

Billet aluminum custom Cateye License Backing Plates and License Plate Frame are ball milled on the back, grooved to hide the taillight wires and include hardware for mounting on the hinge bracket. The billet aluminum hinge mount has a spring loaded detent for positive engagement. The detent half of the hinge is polished aluminum, the rest is chrome plated including the mounting hardware. Folds parallel to frame when parking in tight spaces to give you room to move around your bike. Fits 4" x 7" license plates.

Part#:M13115 - Chrome Plated Thin Cateye Taillight License Plate Backing Plate & Frame. Mount left side & use with M11221 taillight ... $121.25

Optional Taillight is manufactured from ABS plastic.
Taillight mounts on 2" centers, measures 6 1/2" long x 1 3/4" wide x 1 1/2" tall.
License mount fits flat or curved fenders.
19 LEDs used in taillight, 4 LEDs used for license plate light.
12 volt applications.
Includes mounting hardware.

Part#: M11221 - Chrome Plated Bulb type Tailight only ... $19.55 (please note our order minimum of $35.00.  Take advantage of our Flat Rate Shipping and get everything you need now!)

Bullet turn signal bar and license plate relocation kit for Touring Harley-Davidson motorcycles.
BULLET TURN SIGNAL BAR & LICENSE PLATE RELOCATION KIT FOR BIG TWIN - V-FACTOR

This complete kit moves your license plate from the support bar to the rear fender giving your Touring model a custom look.
Includes bullet turn signals and trim piece to cover original license plate holes.

Part #: M11443 - Black LED License Plate Kit with amber lenses, Fits Touring models 1998/2008
Replaces HD# 53702-04A ... $197.95

Chrome bullet turn signal and license plate relocatioh kit for Big Twin Touring HD motorcycles.
BULLET TURN SIGNAL BAR & LICENSE PLATE RELOCATION KIT FOR BIG TWIN - V-FACTOR

This complete kit moves your license plate from the support bar to the rear fender giving your Touring model a custom look.
Includes bullet turn signals and trim piece to cover original license plate holes.


Part #: M11447 - Chrome Plated LED License Plate Kit with amber lenses, Fits Touring models 1998/2008
Replaces HD# 53702-04A ... $197.95

Secured by SSL - an authentic COMOCO site.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

PLEASE NOTE: We Do NOT Backorder. If your item is not in stock, you will be notified and given a refund.

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2017 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

All-Over-Print

Protected by Copyscape Duplicate Content Detection Software

 American Made Leathers to Last a Lifetime! FoxCreekLeather.com

Free Shipping! Necklaces, Earrings, Bracelets, Rings, Brooches, etc at SammyDress.com! 

Motorcycle Eyewear