ENGINE MOUNT FOR FLT & FXR - Sta-Bo
All purpose, fully adjustable, while installed.
Helps absorb vibration.
Fuel & oil resistant.
Installs like OE.
#: M26060 - Sta-Bo Motor Mount. Fits FLT models 1980/2008 & all FXR
models 1982/Later. Replaces HD# 16207-79B ... $59.59
ENGINE MOUNT FOR FLT & FXR - D&S Performance
Exceeds OEM specifications in every aspect and is recommended for
high horsepower applications.
For improved rubber to sleeve contact a steel washer is attached to the
top of the sleeve preventing "tear out".
For maximum strength all steel components are heat treated.
The rubber composite is chemically bonded to the steel components for years
of trouble-free service.
Unaffected by oil or temperature.
Manufacturer's 2 year limited warranty.
Part #: M26059 - D&S Performance Motor Mount.
Fits FLT models 1980/2006 & all FXR models 1982/Later.
Replaces HD# 16207-79B ... $66.00
|ENGINE EQUATOR II FOR TOURING MODELS - Custom Cycle Engineering
This bracket will allow you to correct chassis misalignment, which
you cannot do with the OEM motor mount.
Equipped with slots for the engine bolts and a series of hash marks
for reference. The engine is now able to move right or left in the
frame to achieve perfect power train alignment.
Includes an adjustable stabilizing link that connects the mount to
the frame lug.
Part #: 26001 - Fits Touring Models 2009/Later ... $309.05
||BILLET FRONT ENGINE MOUNT BRACKET FOR TOURING MODELS - V-FACTOR
Replace your OE stamped steel front engine mount with this high strength
chrome billet aluminum version
Use with our 26064 stabilizer link to complete the job (sold below)
Part #: M26063
- Chrome Plated Bracket.
Fits Touring Models 2008/Later.
Replaces HD# 16205-10 ... $110.50
|| ENGINE STABILIZER LINK FOR TOURING MODELS - V-FACTOR
High quality replacement chrome stabilizer link for Touring models.
Use with our 26063 billet front engine mount bracket to complete the
job (sold above).
Part #: 26064
-Chrome Plated Link.
Fits Touring Models 2009/Later.
Replaces HD# 16213-10 ... $44.95
TOP ENGINE MOUNT FOR BIG TWIN - Wire Plus
coilL up and in to leave room for switch housing
up to 100" Big Twin motors
for Wire Plus switch housings
- CNC machined
from billet aluminum
frame with top motor mount through-bolt hole
long x 2.250" wide x 3.250" tall
Twin Cam or aftermarket coils that mount on 2" centers with a mounting
lug 2 9/16" wide or less
Big Twin Evolution 1984/Later & Twin Cam 1999/Later - Part#:M26009
||HEAVY-DUTY TOP ENGINE
MOUNT FOR SOFTAIL - V-FACTOR
heavy-duty mount is 1/4" thick.
Complete with choke/horn bracket, mounting hardware and brackets.
Part #: M26050 - Fits Softail models 1984/1999. Replaces HD# 16852-83 ... $46.17
ENGINE MOUNT WITH COIL MOUNT FOR BIG TWIN EVOLUTION - Paughco
Includes FXR type coil mount for OE style coil that
mounts on 2" centers.
Use included L bracket for solid mount frame.
#: M26032 - Chrome Plated Top Motorcycle Engine
Mount, Fits Big Twin Evolution engine in rubber or solid mount frame.
Replaces HD# 16216-83D & 16219-91 ... $53.90
FOR BIG TWIN EVOLUTION & TWIN CAM - V-FACTOR
This two piece top engine mount measures 5/32" thick and can be used
for Softail type solid mount applications (use both pieces) or for rubber
mounted engine applications (use one piece). The two piece design allows
for the use of taller cylinders and/or an offset engine. This custom mount
is designed for applications that do not require brackets such as the choke
mount or horn mount connected to the top engine mount. Frame bracket can
be mounted on either top or bottom of motor bracket, using 3/8" mounting
bolts of your choice to bolt engine and frame bracket together.
Part #: M26052 - Chrome Plated Mount,
Fits all Big Twin Evolution models 1984/Later & Twin Cam 88 engine
when used in a solid mount type frame.
Replaces HD# 16242-90 & 16247-91 ... $34.55
LOWER ENGINE MOUNT SETS FOR K MODEL & SPORTSTER - Paughco
chrome plated steel.
Thickness and strength exceeds original equipment specifications.
- Chrome Plated Set,
Fits K Model & Sportster models 1954/1981.
Replaces HD# 16210-79 & 16213-79 ... $61.99
DUTY TOP ENGINE MOUNTS FOR PANHEAD AND SHOVELHEAD - V-Factor
These mounts are manufactured from 7mm thick high grade steel and chrome
plated. Each mount is made of several pieces and bolted together with
2 heavy duty bolts. The strongest engine mounts on the market.
- Fits Panhead
and Shovelhead 4 speed models 1948/Later.
Kit for models with choke and horn or ignition switch mounted on engine mount. ...
TOP ENGINE MOUNTS FOR PANHEAD & SHOVELHEAD -
These mounts are manufactured from 7 mm thick high
grade steel and chrome plated.
Each mount is made of several pieces and bolted together with 2 heavy-duty
The strongest engine mounts on the market.
Part #: M26027
- Chrome Plated Kit for models without either choke and horn or ignition
switch on engine mount.
Fits Panhead & Shovelhead 4 speed models 1948/1984.
Replaces HD# 16852-87T ... $35.00
have all the parts, mounts & hardware you need. There is too much to
put all of it online! Give
us a call. 603-237-8200.
For Motor Mounts, Stablizers,
Motor Mount Covers and other parts for Rubbermount frames (late model
FL's, FXR, XL, etc.) go HERE.