Specialty pages:

Sportster Section

V-Rod parts

Le Pera Old School Solo Seats & Pillion Pads for Custom Use

Solo seats measure 10" Wide x 13" Long and include a universal front mount.  Studs are provided for rear spring mounts.  Pillion pads measure 10" long x 5" wide.

Seats are $124.10 including shipping*, Pillion Pads are $93.50 including shipping*.

'SUPER DELUXE' SPRING MOUNT SOLO SEAT FOR UNIVERSAL MOUNT - Le Pera

Universal skirted solo seat with naugahyde cover and a steel base plate. This seat will not mount using OEM spring post and tee bar. Front mounting tee included. Made in U.S.A.

Part#:MU27414 ... $148.93 including shipping*

Solo Motorcycle Seat Brackets for Big Twin and Sportster - V-Factor

Great addition for adding a classic old school solo seat look to your bike.

Slimline Solo Seat - Jammer Cycle Products

Here ya go, the thinnest, baddest looking solo seats you're ever going to find for your retro ride! These seats have about 1/2 inch of padding, giving an extremely low profile, and flipped up back for support and to keep you from sliding off when you give it the gas! The narrow versions measure 11-1/2" long x 9-1/2" wide while the wide versions measure 13" long x 11-1/2" wide. Constructed with a formed steel base that won't crack like fiberglass bases, and covered with a high quality naugahyde that will last for years. Seats mount to any frame using seat springs and appropriate mounting brackets (lower on page). Available in black, red or white. Matching pillion pads available below.

Prices include shipping*.

Spider Web Stitching in Red or White

Retro Solo Seat with Spider Web Stitching - Jammer Cycle Products

What a killer look these seats have got! This is the 'Retro' solo seat with a sewn in Spider Web design ... totally cool! These seats use the 'Slimline' narrow baseplate, but have a little more padding. Flipped up in the back for support and to keep you from sliding off when you give it the gas, they measure 11-1/2 inches long x 9-1/2 inches wide. Covered with a high quality black naugahyde with your choice of either red or white 'Spider Web' stitching. Seats mount to any frame using seat springs and appropriate mounting brackets (lower on page).

#CC632113 - Retro Solo Seat 'Spider Web' with Red Stitching ... $121.96 including shipping*                          

#CC632114 - Retro Solo Seat 'Spider Web' with White Stitching ... $121.96 including shipping*              

EZ Pillion Pad - Jammer Cycle Products

EZ P-pads with smooth top to match our 'Slimline' solo seats. These p-pads feature 6 suction cups for show use without drilling holes in your fender. The baseplate also features 2 threaded (metric) inserts for those of you who want to permanently mount the pillion pads. Simply remove the 6 suction cups and run bolts (bolts included) up through the fender mount. P-pads measure 10-1/2" long x 5-3/4" wide and 3-1/2" high. Contoured to conform to the radius of your fender perfectly, and slightly higher in the back to provide support for your passenger. Covered with the same high quality naugahyde as our 'Slimline' solo seats and available in black, red or white. Prices include shipping*.

Retro Pillion Pad - Jammer Cycle Products

These Pillion Pads are patterned after the old p-pads of the 60's, and look sweet when hooked up with our 'Slimline' or 'Spider Web' style 'Retro' solo seats. Covered with the same high quality naugahyde in your choice of matching black, white or red. Pad measures 11" long x 4-3/4" wide x 1-1/2" high. Features 4 grommets to run bolts through for attaching to fender. Prices include shipping*.

Pimpin' Solo Seat with Chrome Buttons - Jammer Cycle Products

Take the diamond stitched version of the 'old school' solo seat, add chrome buttons and you've got one 'pimpin' seat! Patterned after the old 'Bates' style seats of the 60's, these solo seats measure 12-1/2 inches long x 9-1/2 inches wide. Constructed with a formed steel base and covered with high quality black , red or white naugahyde in a diamond pattern and featuring chrome buttons. Seats mount to any frame using seat springs and appropriate mounting brackets (lower on page). Matching pillion pad with chrome buttons also available below. Prices include shipping*.

Also available in black or white.

Pimpin' Pillion Pad with Chrome Buttons - Jammer Cycle Products

EZ P-Pads with chrome buttons to match our Pimpin' solo seats. These p-pads feature 6 suction cups for show use without drilling holes in your fender. The baseplate also features 2 threaded (metric) inserts for those of you who want to permanently mount the pillion pads. Simply remove the 6 suction cups and run bolts (bolts included) up through the fender mount. P-pads measure 10-1/2" long x 5-3/4" wide and 3-1/2" high. Prices include shipping*.

Old School Solo Seat - Tuck and Roll

You want 'old school'? You want value for your hard-earned bucks? Well here ya go! Patterned after the old 'Bates' style seats of the 60's, these solo seats measure, 12-1/2 inches long x 9-1/2 wide. Constructed with a formed steel base that won't crack like fiberglass bases, and covered with high quality black, red or white naugahyde, these seats are built to last! Seats mount to any frame using seat springs and appropriate mounting brackets that are available lower on this page. A great addition to any retro bike build! Prices include shipping*.

EZ Pillion Pad - Tuck and Roll

EZ P-Pads with tuck & roll pattern to match the 'Old School' tuck & roll solo seats. Feature 6 suction cups for show use without drilling holes in your fender. The baseplate also features 2 threaded (metric) inserts for those of you who want to permanently mount the pillion pads. Simply remove the 6 suction cups and run bolts (bolts included) up through the fender mount. P-pads measure 10-1/2" long x 5-3/4" wide and 3-1/2" high. Contoured to conform to the radius of your fender perfectly, and slightly higher in the back to provide support for your passenger. Available in black, red, or white with tuck & roll pattern.

Old School Solo Seat - Diamond

A diamond stitched version of the classic 'old school' solo seat. Patterned after the old 'Bates' style seats of the 60's, these solo seats measure 12-1/2 inches long x 9-1/2 inches wide. Constructed with a formed steel base that won't crack like fiberglass bases, and covered with high quality black, red or white naugahyde in a diamond pattern, these seats not not only look good but are built to last as well! Seats mount to any frame using seat springs and appropriate mounting brackets available lower on this page. A great addition to any retro bike build!

EZ Pillion Pad - Diamond

EZ P-Pads with diamond pattern to match the 'Old School' diamond solo seats. Feature 6 suction cups for show use without drilling holes in your fender. The baseplate also features 2 threaded (metric) inserts for those of you who want to permanently mount the pillion pads. Simply remove the 6 suction cups and run bolts (bolts included) up through the fender mount. P-pads measure 10-1/2" long x 5-3/4" wide and 3-1/2" high. Contoured to conform to the radius of your fender perfectly, and slightly higher in the back to provide support for your passenger. Available in black, red, or white with diamond pattern.

Retro Solo Seat Metal Flake - Smooth - Jammer Cycle Products

These 'Retro' solo seats use the 'Slimline' narrow baseplate, but have just a little more padding for added comfort. Flipped up in the back for support and to keep you form sliding off when you give it the gas, the measure 11-1/2 inches long x 9-1/2 inches wide. Constructed with a formed steel base that won't crack like fiberglass bases, and covered with a high quality 'Zodiac' metal flake covering in your choice of blue, red, charcoal, silver or green. Seats mount to any frame using seat springs and appropriate mounting brackets (available lower on page). Prices include shipping*.

Old School Solo Seat Metal Flake - Diamond - Jammer Cycle Products

Metal flake versions of the diamond stitched 'old school' solo seat. Patterned after the old 'Bates' style if seats if the 60's, these solo seats measure 12-1/2 inches long x 9-1/2 inches wide. Constructed with a formed steel base and covered with high quality blue, red, charcoal or green 'Zodiac' metal flake covering in a diamond pattern, these seats not only look good but are built to last as well! Seats mount to any frame using seat springs and appropriate mounting brackets (available lower on page). Prices include shipping*.

"Slimline" Contoured Metal Flake Solo Seats - Jammer Cycle Products

The "Slimline" solo seat has been contoured in the front to match the lines of the frame and provide a little more seating area.  These seats have about 1/2" of padding, giving an extremely low profile, and are flipped up in the back for support and to keep you from sliding off when you give it the gas!  These Contorured solo seats measure 13" long x 11-1/2" wide and are construced with a formed steel base.  These metal flake versions are covered with a high quality "Zodiac" metal flke covering in your choice of blue, red, charcoal, silver or green.  Seats mount to any frame using seat springs and appropriate mounting brackets that are also available on this page. Prices include shipping*.

Also available in Green (not shown).

Retro Pillion Pad Metal Flake - Jammer Cycle Products

These pillion pads are patterned after the old P-Pads of the 60's, and look bitchin' when used with our 'Metal Flake' solo seats! Covered with the same high quality 'Zodiac' metal flake covering as our seats, and available in your choice of matching metal flake blue, red, charcoal, green or silver. Pad measures 11 inches long x 4-3/4 inches wide x 1-1/2 inches high. Features 4 grommets to run bolts through for attaching to fender. Prices include shipping*.

#CC632085 - Hard Ass P-Pad with Black Leather Inserts ... $202.99 including shipping*                              

#CC632086 - Hard Ass P-Pad with White Leather Inserts ... $202.99 including shipping*                              

#CC632088 - Hard Ass P-Pad with Red Metal Flake Vinyl Inserts ... $202.99 including shipping*                

Rigid Stinger Saddles - Corbin-Gentry

Original designs by Corbin-Gentry are a smaller type of rigid seat available as thin profile MKI or the thick version MKII or MKIII. Stinger III is fully buttoned with an intricate pattern in durable Naugahyde. Fit rigid frames. Prices include shipping*

Corbin Gentry for Rigids - Widow Maker Seat

Original Corbin-Gentry design features 13 inch high self-support back, for the classic shopper style on rigid frames. Premium Naugahyde. Thickly padded.

Part # VT47-1966 ... $276.95 including shipping*

Corbin Gentry for Rigids - Captain America style Seat

High Back Seat Replica of Captain America Style of 1969 features chrome buttons and 21 inch back height for rigid frames only. Requires tall sissy bar recommended for support.

Part #VT47-1967 Captain America style seat for rigid frames ... $498.99 including shipping*

Vintage Seat Kit - Roland Sands Design

• Add a period-style bobber seat to your venerable Softail.
• Seat inspired by the Softail conversion Roland Sands Designes created and dubbed El Borracho.
• Seat includes fiberglass battery cover, billet seat pivot, steel seat supports, seat springs and steel seat pan.

Part #DS0804-0249 - For 00-06 FXST ... $554.96 including shipping*

Please note: This is a special order item. While most items ship the same or next business day, this item will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

Seat Pans for Softail & Deuce - Drag Specialties

• Constructed of ABS plastic.
• Allow you to trim the seat pan to conform to your custom parts.
• Have all mounting hardware already installed.
• Made in the U.S.A.

#DS1910-4009 - For 2000-2005 FLST, FXST (except FXSTD and FLSTN) ... $104.95 including shipping*         

#DS1910-4010 - For 2000-2006 Deuce ... $104.95 including shipping*                                                       

NOTE:  This is a special order item.  While most items ship the same or next business day, these will take a few extra days to ship.  No express delivery available.  No returns.

Seat Pan for OEM frames with Stretched Tanks - Drag Specialties

• Tough ABS plastic seat pan allows you to build your own custom seat.
• Includes front and rear mounting tabs and four rubber paint protectors.
• Easy-to-follow instructions are included for cutting seat pan to fit a wide variety of stretched tanks.
• Made in the U.S.A.

Part #DRDS-490350 - For 84-99 Softail models ... $104.95 including shipping*                                          

NOTE:  This is a special order item.  While most items ship the same or next business day, these will take a few extra days to ship.  No express delivery available.  No returns.

Slimline Seat Pans - Jammer Cycle Products

Do you love our solo seats but wish you could cover it with an exotic leather, snakeskin or material to match your custom paint job? Well, here's the solution. We are offering our 'Slimline' seat pans separately, available in either the narrow version that measures 11-1/2 inches long x 9 inches wide, or the wide version that measures 12-1/2 inches long x 11 inches wide. These seat pans feature a high-rise flip at the back, are made from heavy gauge steel plate, pre-drilled around the edges for riveting the covering to the seat pan, then black powder coated for a durable finish. Price includes shipping*.

Lone Star Seat Pan can be found on our regular SEATS page.

SADDLEGEL™ RAW SADDLE GEL FOR SEAT BUILDING

DS-9425 Medium rear pad (9” L x 7 1/2” rear width x 5 1/2” front width) $54.95 including shipping*.

DS-TRA9422 Large front pad (10” L x 13 1/2” rear width x 7 1/2” front width) $64.95 including shipping*.

This item appears on page 168 of the Drag Specialties Fatbook.  We sell everything in the Fatbook, as well as all the items in these catalogs.

NOTE:  This is a special order item.  While most items ship the same or next business day, these will take a several extra days to ship.  No express delivery available.  No returns.

SPRINGS AND MOUNTS:

Sportster

Please order hardware with seats for these prices, unless otherwise noted.

Except as noted, please call to order if not purchasing seat. Extra shipping charges will be added. We have a $35 total minimum order.

PRICES INCLUDE SHIPPING IF PURCHASED WITH SEAT OR PAD:

MALTESE CROSS PILLION PAD FOR CUSTOM USE

• Phantom Pad
• Vinyl Construction
• Ideal for quick and easy installation & removal
• Measures 9" Long x 9" Wide x 2" Thick
• Held in place by 5 dual cavity suction cups with quick release tabs
• Manufacturer recommends for show use only

Fits 10" or Wider Rear Fender ... Part#:MU27389 ... $142.87 including shipping*.

You can find more retro and old school products in the Jammer's Handbook. We carry everything in this catalog and will keep adding more products online.

More Custom Pillion Pads can be found on the Seats Accessories page.