Specialty pages:

Sportster Section

V-Rod parts

BIGSEAT - Danny Gray

Deep bucket touring solo provides excellent support for the lower back.
Incorporates proprietary buttcrack design for comfort and secure positioning.
All seats are skirted and available with or without studs.
Integrated form fitting pillion pads are available in small and large versions.

FOR 06-07 DYNA GLIDE (EXCEPT FXDWG)
Part # DS0803-0260 Bigseat w/o studs $287.96 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

COBRA SOLO SEAT FOR FXR - Le Pera

Designed to complement our Le Pera Solo Seats, these Passenger Pillion Pads feature a powder coated steel baseplate that is fully carpeted to help prevent the rear fender's paint from being scuffed.
Each pillion pad includes a specially poured high density Marathon molded foam foundation covered by a premium grade Naugahyde. Made in the U.S.A. Purchase seat and pillion separately.

Part#:TR49-7368 - Cobra Smooth Solo Seat (seat only)
Fits FXR 1982/Later ...$173.16 including shipping*

"SILHOUETTE" SEAT FOR FXR MODELS - LePera

The "Silhouette" seat is designed to enhance the lines of your motorcycle with a clean , sleek look. Comfort in each seat is retained by a perfectly sculptured one piece molded foam foundation. This seat features a premium grade vinyl cover and a powder coated, steel base plate which is carpeted. Made in the U.S.A.

Part#:MU27063 Fits FXR 1982/Later ... $277.10 including shipping*

NAUGAHYDE BARE BONES SOLO SEATS FOR DYNA - LePera

Handcrafted in the USA.
Powder coated steel baseplate that has a metal reinforced vinyl protectant around the edges and is carpeted to protect the paint.
An excellent choice for those who choose to ride solo.
Double top stitched with bonded polyester thread for durability and longevity.
A specially poured high density Marathon molded foundation is added an every inch of the top grade naugahyde is pulled tight around the edges and then meticulously trimmed for the cleanest finish possible.
Provides a lower riding position and gives the bike a lowered appearance.


Part#:TR49-9804 - Fits FXDWG 1996/2003 (Wide Glide) ... $165.96 including shipping*

Part#:TR49-9150 - Fits FXD 2004/Later (Narrow Glide) ... $165.96 including shipping*

NAUGAHYDE SILHOUETTE SEATS FOR DYNA MODELS - LePera

Comfort is achieved by using a high density Marathon molded foam foundation built on a powder coated steel baseplate.
The baseplate is carpeted to help protect the paint on the frame and fender. Made in the U.S.A.

Part#:MU27098 - Fits FXD 2004/Later (Narrow Glide) ... $277.10 including shipping*

VINYL SORRENTO SEATS FOR DYNA NARROW GLIDE - LePera

Comfort is by using a high density Marathon molded foam foundation built on a powder coated steel baseplate
The baseplate is carpeted to help protect the paint on the frame and fender
The Sorrento combines the sleek look of the Silhouette seat with the long distance comfort of the Maverick seat
The rider portion of the seat measures 12 1/2" wide and the passenger portion measures 9 1/2" wide

Part#:MU27079 - Fits FXD 1996/2003 Narrow Glide ... $401.40 including FREE shipping*

Part #:MU27097 - Fits FXD 2004/Later Narrow Glide ... $401.40 including FREE shipping*

VINTAGE SOLO SEATS & PILLION PADS FOR DYNA MODELS - Mustang

Vinyl.
The Vintage Solo Seat can be used by itself for solo riding, or add the passenger Pillion for two-up riding.
Built on 16-guage formed steel baseplates for strength and then black powder coated on both sides to prevent rust.
Molded high density polyurethane foam.
The Solo Seat measures 13 1/2" wide
The thin passenger Pillion Pad measures 6" wide.
The standard passenger Pillion Pad measures 9" wide.

Part#:MU27262 Solo Seat - Fits FXD & FXDWG 1991/1995 Discontinued

Part#:MU27263 Solo Seat - Fits FXD & FXDWG 1996/Later Discontinued

Part#:MU27388 Thin Pillion Pad - Fits FXD & FXDWG 1996/Later ... $109.84 including shipping*

Part#:MU27387 Standard Pillion Pad - Fits FXD & FXDWG 1996/Later ... $126.27 including shipping*

"SILHOUETTE" SOLO SEATS FOR DYNA MODELS - LePera

The Dyna models are sleek motorcycles. Now you can bring out those fine lines with one of these Silhouette seats. As with all Le Pera seats, they feature a powder coated and carpeted steel base plate with a metal reinforced vinyl protectant surrounding all edges. Comfort is produced by the special poured one piece high density "Marathon" molded foam foundation. The seat is then covered with a premium naugahyde and stitched with a bonded polyester thread. Definitely a top quality seat. Fits Dyna models 1996/2003 as listed. Made in the U.S.A.

Part#:TR49-9919 - Fits All Dyna models except FXDWG 1996/2003 ... $176.76 including shipping*

"REGAL DUKE" PILLOW SEATS FOR ALL DYNA MODELS - Mustang

Soft pillow comfort with just enough folds and pleats to allow the highest of quality expanded vinyl cover full freedom to flex and conform to your body's shape. For maximum comfort, the controlled density foam is topped with a full inch of soft poly foam and tufted with covered buttons. To provide years of service and the best fit, the one piece baseplate is formed from 16 gauge steel and black epoxy powder coated to eliminate any chance of rust. Frame rail bumpers and carpeting also help to prevent fender damage. The rider portion of the seat measures 13" wide and the passenger portion measures 8 1/2" wide. Two different length rear mounting tabs are also included. Short tab for Dyna Glide models (FXD) and long tab for Dyna Wide Glide models (FXDWG). Fits all Dyna models 1991/1995. Made in the U.S.A.

Part#:DS900502 - Fits Dyna 1991/1995 ... $284.06 including shipping*

FOR 82-94, 99-00 FXR
DRDS-905546 Studded, one-piece wide style (16” W front, 12” W rear) ... $423.96 including shipping*

SILHOUETTE SEAT FOR DEUCE - Le Pera

Naugahyde. Made in the U.S.A.
Comfort is achieved by using a high density Marathon molded foam.
The one piece steel baseplate is powder coated to prevent rust and stamped for a perfect fit to eliminate any gaps.
The baseplate is carpeted to help protect the paint on the frame and fender.

Part#:27086 - Fits FXSTD 2000/Later ... $277.10 including shipping*

FOR 06-07 DYNA GLIDE
Part #: DS0803-0212 - SaddleHyde  ... $387.96 including shipping*

FOR 04-05 DYNA GLIDE (EXCEPT FXDWG)
Part #: DS0803-0131 - SaddleHyde $387.96 including shipping*

FOR 96-03 DYNA GLIDE (EXCEPT FXDWG)
Part #: DS8350JS - SaddleHyde ... $387.96 including shipping*

FOR 91-95 DYNA GLIDE (EXCEPT FXDWG)
Part #: DS8950JS - SaddleHyde ... $369.96 including shipping*

FOR 04-05 FXDWG
Part #: DS0803-0143 - SaddleHyde ... $387.96 including shipping*

FOR 96-03 FXDWG
Part #: DS83G50JS - SaddleHyde ... $387.96 including shipping*

FOR 93-95 FXDWG
Part #: DS89G52JS - SaddleHyde w/ driver backrest ... $549.96 including shipping*                                                   

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.