Specialty pages:

Sportster Section

V-Rod parts

NEW! V-FACTOR SISSY & REAR FENDER SUPPORT BAR FOR FAT BOB REAR FENDER

Heavy gauge rear fender support.
Use to support Fat Bob rear fender.
Chrome Plated.

Tilt Back Sissy Bar for 9 inch Wide Flat Fenders

Beautifully chrome plated tilt back sissy bar from 5/8 inch round stock. Measures 19 inches above fender with a total height of 32 inches. Use with #KW11332 9 inch flat fender (found here). Kraft/Tech, made in USA.

Tilt back sissy bar fits rigid style frames with 9 inch wide flat fenders #KW11327 ... $131.87 includes shipping*

Straight Back Sissy Bar for 9 inch Wide Flat Fenders

Beautifully chrome plated straight back sissy bar from 5/8 inch round stock. Measures 17 1/4 inches above fender with a total height of 32 1/2 inches. Use with #KW11332 9 inch flat fender (found here). Kraft/Tech, made in USA.

Straight back sissy bar fits rigid style frames with 9 inch wide flat fenders #KW11328 ... $131.87 includes shipping*

PAUGHCO RIGID FRAME SISSY BARS

• Chrome-plated
• Designed for custom rigid frame applications

PAUGHCO RIGID FRAME SISSY BAR for H-D with Fat Bob Fender and Chain Drive - 35" H x 9-3/8" W - BC59-9006 ... $116.25 including shipping*

PAUGHCO RIGID FRAME SISSY BAR for H-D with Flat Fender and Chain Drive - 35" H x 9-3/8" W - BC59-9008 ... $116.25 including shipping*

Sissy Bars for Rigid Frames

Give your scoot the finishing touch with this sissy bar for rigid frames. Manufactured from 1/2" diameter cold-rolled steel bar stock. After being bent and polished, they're plated with a show chrome finish. This sissy bar measures 13" from the bottom mounts to the fender brace, then 14" from the fender brace to tip of sissy bar for an overall height of 27". Measures 10" wide at the bottom mounts and 8-1/2" wide at the fender brace. Top 3" of sissy bar tip is bent back for a cool look. For use with custom flat fenders.

These sissy bars work great on Triumph rigid choppers as well as Harley Davidsons.

#CC09624 - Sissy bar for use with custom flat fenders on rigid frame ... $112.79 including shipping*                                                                                                      

SWINGARM AND SOFTAIL FRAME SIDE RAILS & SISSY BAR KITS FOR ALL BIG TWIN AND SPORTSTER - Khrome Werks

Designed and manufactured in the USA, these chrome plated Side Rails and Sissy Bars are available for most popular models of HARLEY-DAVIDSON® motorcycles and feature a quick and easy mounting system. After initial side rail installation, these sissy bars bolt on externally with buttonhead bolts. This mounting system allows the rider the option of riding with or without the sissy bar and interchanging sissy bar styles. Choose from Round, Lowboy, Mini Lowboy, Bantam or Super Low Style. The side rails are constructed from heavy duty 1/8" steel plate, the Round sissy bar measures 5/8" in diameter while the Lowboy sissy bars are 9/16" square. Both styles are interchangeable. These come as a kit which includes the rail and sissy bar together. Made in the U.S.A. See below for sissy bar pads for the Bantam.

Price includes shipping! Dimensions listed below the part number indicate the sissy bar height above the fender (in inches) :

Plain

Studs

Part #: MU27527 - Chrome Studs ... $78.80 including shipping*

'Plug N' Play' Removable Backrest Brackets by JB Fabrications

• This clever device allows you to go from solo to two-up in minutes.
• Can be removed and installed quickly, over and over, without the risk of paint damage unlike ordinary sissy bar or backrest brackets
• Bolts directly to existing mount holes on most models and the passenger seat fits right over the top of the triple chrome plated Plug N' Play bracket
• Works with most standard square tube sissy bar uprights
• Provides an easy way to attach a T-bag for solo riders
• For OEM or Aftermarket sissy bar, 6-11/16 mounting with 10" high maximum height

#CC06120 - Fits Original Equipment Fenders ... $181.99 including shipping*

Sissy Bars to fit Plug and Play Brackets (6-11/16 square tubing):

#MU28237 - Super Low Bar sits a mere 5 3/4" above the rear fender ... $74.30 including shipping*

#MU28234 - Bantam sits just 8 1/4" over the rear fender ... $79.30 including shipping*

Part#:MU27505 - Regal Style 6" High. ... $81.80 including shipping*

Includes mounting hardware!

SISSY BAR PADS FOR ROUND SISSY BARS - Khrome Werks

Your passenger and their posture will thank you for installing one of these Sissy Bar Pads. These Pads complement our Round Khrome Werks Sissy Bars, are a necessity for those long trips to Daytona or Sturgis and real comfortable for just riding around town. Constructed of durable black vinyl these 1 1/2" thick pads are sure to give your passenger miles of riding comfort. Available in Pillow or Smooth styles. Chrome Plated Mounting Bracket and Hardware are included. Made in the U.S.A.

This "Pillow Style" pad compliments our Round Khrome Werks Sissy Bars, are a necessity for those long trips to Daytona or Sturgis real comfortable for just riding around town. Constructed of durable black vinyl this 1 1/2" thick pad is sure to give your passenger miles of riding comfort. Part#: TR49-1412... $68.29 including shipping*

• High-quality steel construction with a chrome finish.
• Luggage rack folds up and out of the way when not in use.
• Attaches to the existing OEM sissy bar uprights on models listed.

Part #: DS1510-0007 - For 02-05 FXD/FXDWG models w/ low sissy bar upright (OEM #s 51514-02, 52655-02 and 52655-02) ... $157.65 including shipping*                                           

PLEASE NOTE: Sissy bar pad not included.

Please note: This is a special order item. While most items ship the same or next business day, this item will take a few extra days to ship. No express delivery is available. No returns on Special Order items.