ball bearing movement.
Wheels lifted less than 1.5" off the ground.
Small, portable size.
Works on front and rear wheels.
Sturdy steel and aluminum construction.
For use on road motorcycle only, not for off-road tires.
U.S. Patent No. 8,002,122. Made in the USA.
#: M57924 - Wheel Jockey Sport Model, for Bikes up to 650 lbs.
#: M57925 - Wheel Jockey Big Boy Model, for bikes up
to 950 lbs. ... $89.95
BEARING TOOL SUPPORT PLATE FOR FL MODELS - Jims
support plate provides accurate and precise bearing removal
and installation on cast wheels without the risk of damage.
This plate attaches to the brake rotor mounting holes and is used in
conjunction with our Jims® bearing tool kit, Part 57914 (sold below).Made
in the USA.
Part #: 57915 - Fits FL Models 2014/Later with cast wheels & CVO
Models 2010/Later with 5 or 7 lug rotors ... $96.84
BEARING TOOL FOR ALL MODELS 2000/LATER - Jims
to remove and install sealed ball type wheel bearings.
Will not damage bearings when removing.
Works with 3/4" and 1" I.D. bearings.
in the USA.
Part #: 57914 - Fits Big Twin & Sportster 2000/Later. Replaces HD#
44060 ... $351.62
TRUING STAND - Park Tool
stand is constructed from heavy gauge steel which allows for
extremely accurate and reliable wheel truing at an economical
Works with wheels up to 180mm wide and 740mm in diameter.
Bolts to any flat surface.( Note: Fasteners not included with stand.)
Part #: 60850 - Wheel Truing Stand ... $102.74
WHEEL SERVICE CENTER FOR ALL MODELS by Rowe
multi-purpose wheel tool is a necessity for any self supporting
shop or do it yourselfer. It will fit all OE size wheels and
most wide tire size wheels. Check & true wheels with up
to 1" I.D. bearings. Static balance assembled wheels on
the top mounted V slots or use the low drag precision bearings
(shown in inset). Free standing steel base can be permanently
bench mounted. Adjustable pointer for checking radial & lateral
run out. Includes spoke wrench that fits six different size
spoke nipples. Made in U.S.A.
... Retails for $620.00 Price:
TIRE BEAD BREAKER - V-FACTOR
to carry on the road in saddle bags, etc.
Breaks down for easy storage.
Perfect for home work shop.
Not for use on solid wheels.
Part #: M57921 - Portable Tire Bead Breaker ... $45.95
RACE TOOL FOR WHEELS & REAR FORKS - Jims
to remove and install Timken® style bearing races without
Three piece tool locks tight into the race and makes a once difficult
Use with our 60751 universal driver tool.(Sold below.)
in the USA.
Part #: M57905 - Fits Big Twin & Sportster wheels with tapered Timken® style
bearings 1973/1999, Big Twin 4 speed rear forks 1958/1986 (except Softail).
Replaces HD# 33071 ... $108.32
DRIVER TOOL FOR JIMS TOOLS - Jims
with many of Jim's tools.
Sold separately to decrease your tool costs.
Features a knurled 1" O.D. grip and is a total of 12" long.
The 1/2" O.D. pilot includes an O ring to hold the installed tool
in place. Made in the USA.
Part #: M60751 - Universal Driver Tool ...
||WHEEL BEARING REMOVER FOR ALL MODELS 2000/LATER - Motion
Designed to easily remove the sometimes stubborn radial
type ball bearings used on all 2000/Later models and some
Includes split collets for 3/4" I.D. and 1" I.D. bearings.
Note: Once removed the bearings cannot be reused.
Part #: 57913 - Wheel Bearing Remover ... $46.70
||25MM WHEEL BEARING PULLER - Jims
Used to remove 25mm ID wheel bearings.
Note: Must be used with our 57914 wheel bearing installer/remover tool. Made
in the USA.
Part #: 57920 - Fits Softail front wheel 2007/Later (except Springer).
Replaces HD# 44060-10 ... $78.58
Well Sockets with T- Handles
WELL SOCKETS WITH T-HANDLES by Motion Pro
12 point design includes 5/16", 3/8", 7/16", 1/2",
9/16", 5/8", 11/16" & 3/4". Shaft & socket
portion measures 12" and is made from chrome-vanadium tool steel for
strength. Handles measure 8" for good control and are made from carbon
steel. Socket O.D. is kept as slim as possible to access tight areas. Partial
length hex prevents nuts from being pushed too deep into socket. Manufacturer's
Deep well sockets with t-handles. Part#:M07502 ... Price: $77.06
HEAD TORX WRENCH SET - Motion Pro
head with extra long handle for accessing hard to reach places.
Pivot design allows for easy rotation around obstructions.
Pivot design allows you to keep the wrench and fastener engaged when access
Great time saver.
Includes heavy duty folding canvas storage pouch with Velcro® closure.
Takes up less storage space than a typical hex key set.
Part #: M07520 Motion Pro Chrome Plated Pivot Head Torx Wrench Set (Torx)
Includes T-25, T-27, T-30, T-40, T-45 & T-50
a great gift!
stick Locktite kit.
'N Prime Activator -add to kit, optional.
SHIPPABLE BY AIR
STICK LOCTITE PRODUCTS KIT -
Convenient solid stick dispenser provides easy application, storage and
will not drip, spill or run.
For best results, use 05227 Locktite Klean 'N Prime Activator (add to
kit for a few extra dollars, below. Great deal!)
Part#:M05400 - Complete Kit of 5 Price ... $88.61
KLEAN 'N PRIME® ACTIVATOR FOR THREADLOCKER
Recommended to properly prepare the surface and ensure a good bond for
Speeds the cure time.
Ideal for conditions below room temperature.
Part#:M05227 - 4.5 oz. Aerosol Can Klean 'N Prime ...$21.34 Please
Note: Our minimum order is $35.00 total. Take advantage of our low Flat
Rate Shipping and order everything you need now!