Specialty pages:

Sportster Section

Buell parts

V-Rod parts

Allows you to use either an H-D quick-release tour pack mount (avilable from Harley Dealer) or a Road King (FLHR) sissy bar.
Made of high-quality steel, polished and chrome plated.
Works on all stock VRSCA/B V-Rods or with Cycle Visions Road Rod kit.
Requires separate purchase of docking kit and quick-release tour pack mount/sissy bar.

Part #: DS1510-0029 - FOR 02-06 VRSCA/B V-ROD OR CYCLE VISION’S ROAD ROD KIT: Road Rod pack rack mount ... $276.96 including shipping*

PLEASE NOTE:  This is a special order item.  While most items ship the same day, this item will take about 5 days to ship.  There is no express delivery available on this item. No returns on special order parts except for manufacturer defect.

OIL FILTER/COOLER FOR V-ROD - K&P Engineering

Chrome Plated.
With its cleanable stainless steel mesh element this may be the last oil filter you will ever buy.
The 3 1/8" long finned housing acts as an oil cooler and is CNC machined from 6061 T6 billet aluminum.
The high-flow element is made from a medical grade type 304 stainless steel micronic filter cloth that will trap contaminants that far exceed the OEM requirements. Not only does it allow you to make a visual inspection of debris, it is easily cleaned with any type of degreaser or soap and water.
To further improve efficiency, a super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for pre-filtering the oil.
Features a quad-type filter housing to engine case steal, bypass valve and meets or exceeds the manufacter's specifications (will not void new bike warranty).
Includes cup wrench and instructions.

Part#: MU89070 - 20 x 1.5mm Thread - Fits V-Rod 2002/Later ... $151.06 including shipping*

BOSS BLADES® HAND LEVER SET FOR V-ROD - KuryAkyn USA

Chrome Plated.
Dog-leg bend provides the shortest reach possible for small hands while still allowing the necessary range of motion.
Super wide blade design provides 1 3/8" width at the index finger for a comfortable grip.
Includes pivot bushings.
Die cast constructio.n
Fits V-rod (VCSR) 2002/2005, FLHRSEI 2002/Later & Twin Cam with OEM hydraulic clutch master cylinder. Will not fit Screamin' Eagle Custom.
(Replaces HD# 45533-02)

Part#: MU43049 ... $62.50 including shipping*

Four Pad Design

Why four pads instead of two?

* The leading edge of the brake pad always gets better "bite." By having four pads, we have doubled the number of leading edges.
* Since there is full contact between the pad and the piston, differential bore is not needed, so we can use the largest pistons possible all the way around!

Four-Piston Differential-Bore Caliper Kits - Brembo & QTM

• Feature Brembo calipers that are made in Italy and polished and chrome-plated at QTMI.
• Cast aluminum calipers with billet aluminum pistons provide equal expansion rate and longer life.
• Piston bores have a dual O-ring design to keep out dirt and debris.
• Caliper kits include chrome caliper with pads, mounting bracket and hardware; work with OEM rotors.
• Calipers accept replacement brake pads DS-324033.

NOTE: Dual-disc applications require the purchase of left and right sides.

#061701-0155 - Left Side Caliper for 06/08 V-Rod ... $459.76 including free shipping*

#061701-0157 - Right Side Caliper for 06/08 V-Rod ... $459.76 including free shipping*

• Polished billet aluminum construction.
• Rubber inlay and rivets match “Banana Boards” look.
• Fully adjustable.
• Fits any stock peg mount.

ROAD-ROD® PASSENGER FOOTPEG RELOCATION KIT - Cycle Visions

Relocates the passenger footpegs to the swingarm pivot shaft.
Includes a pivot shaft, chrome-plated end caps and clevises.

FOR 02-08 VRSCA/B V-ROD

Part #: DS1620-0005 W/ custom exhaust ... $248.96 including ship ping*

Part #: DS1620-0045 W/ stock or Screamin’ Eagle exhaust ... $275.96 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

Replacement Tires for H-D V-Rod - Dunlop

Dunlop® D207

• O.E. replacement for Harley-Davidson® V-Rod
• Tubless

Special order:  takes 5 days to ship, no express delivery, no returns.

Front - 120/70ZR19 - Part #BC31-4260 ... $183.48 including shipping*                                                       

Rear - 180/55ZR18 - Part #BC31-4262 ... $236.78 including shipping*                                                       

FOR 02-06 V-ROD

Part #DS1401-0044- Fat Rod front fender ...$280.96 including shipping*

PLEASE NOTE:  This is a special order item.  While most items ship the same day, this item will take about 5 days to ship.  There is no express delivery available on this item. No returns on special order parts.

FOR 02-06 VRSCA/B/D

Part# DS1401-0045- Fat Rod rear fender... $334.96 including shipping*

PLEASE NOTE:  This is a special order item.  While most items ship the same day, this item will take about 5 days to ship.  There is no express delivery available on this item. No returns on special order parts except for manufacturer defect.

V-ROD HEAVY-DUTY 412 SERIES SHOCKS
Part #: DSPS412-4054C - For 02-07 VRSCA/B/D, Chrome,  12.5” ... $257.99 including shipping*                 

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

440 SERIES SHOCKS - Progressive Suspension

High-pressure gas-charged for fade-free operation .
Patented Inertia Active System (IAS) damping for unsurpassed handling and comfort.
Feature two independent rebound damping circuits.
Available in anodized billet aluminum end caps with chrome springs or black anodized powder coated end caps with black springs.
Standard shocks are for the average single rider; heavy-duty shocks are better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up.
Inertia valve determines whether the soft (wheel) circuit or the firm (chassis) circuit is utilized to optimize both handling and comfort automatically.
All three damping circuits, compression, as well as soft and firm rebound are also velocity-sensitive.

V-ROD HEAVY-DUTY 440 SERIES SHOCKS

Part#: DS440-4057C- For : 02-07 VRSCA/B/D, Chrome/Polished Shocks, 13.0” ... $481.46 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

418 SERIES SHOCKS - Progressive Suspension

Aluminum body twin shock.
Five-position, externally adjustable rebound damping range allows you to dial in the ride you want .
Four-position, easily adjusted spring preload cam lets you adjust for different load and ride characteristics.
Gas charged for fade-free operation.
Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the touring rider carrying passengers or a body weight of 225 lb. and up.
Velocity-sensitive, multistage internal damping gives a consistent ride and handling over a variety of road surfaces.
The body is machined from aircraft-quality aluminum, clear anodized for an attractive and durable finish.
Double-walled construction (steel inner wall) for excellent durability .
Chromoly 4130 steel shaft, hard-chromed and precision-ground for strength and durability.
Complete shock assemblies include chrome or black springs
TUV approved.
Made in the U.S.A
Sold in pairs.

V-ROD HEAVY-DUTY 418 SERIES SHOCKS

Part #: DSPS4821C - For 02-07 VRSCA/B/D, Chrome, 12.5” ... $431.96 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

Part #: DS10-1565 - For 02-07 VRSCA/B/D (V-Rod) ... $104.66 including shipping*                                    

PLEASE NOTE:  This is a special order item.  While most items ship the same day, this item will take about 5 days to ship.  There is no express delivery available on this item. No returns on special order parts.

CHROME BELT GUARD SET - Lightning Performance Products

Chromed steel belt guard set replaces OEM guards and adds shine.

Part #DSLP-0073531 - For 02-06 V-Rod ... $221.96 including shipping*

Please Note:  This is a special order item.  It cannot be express shipped.  While most items ship the same or next business day, this item will take a few extra days to ship.  No returns on Special Order Items.

Total Fuel Systems EFI Control

These modules are the perfect answer for owners that are making basic air cleaner or exhaust pipe changes on fuel injected Harley models.

• Easy installation with great instructions.
• Plugs into OEM connectors.
• Simple and understandable adjustments.
• Change-and-effect tuning to mimic carburetion tuning.
• Real world driveablility and performance improvement.
• Waterproof construction.
• Limited 2 year warranty.
• Made in the U.S.A.
• Prices include shipping*.

The CV carburetor is an engine-load sensing instrument that feeds fuel based on that load. The engine doesn't care what rpm or throttle position it has, it wants fuel based on its load. Now, comparing that to EFI, the factory fuel maps are very complex and generally very good when the motorcycle is stock, so by looking at the pulse width signal the factory sends to the injector, one can determine what loa the engine is at. The same information that the carburetor got from the engine is available to us in the pulse width signal. Then, it was fairly simple to compile the pulse width signals into zones that equated to CV fuel adjustments (main jet, needle, slide speed and slow speed). These 4 simple adjustments will allow solutions for 80 to 90 percent of EFI tuning difficulties experienced by the customer.

For other models, go to the bottom of this page.

FUEL INJECTION CONTROLLERS FOR V-ROD - Dynatek

Provides the fastest and simplest way to fine tune the fuel delivery without the need for a computer.
Simply use a screw driver to adjust the low, mid & high range from -20% through +20%.
4 selectable base curves correspond to the level of performance modifications as follows:
Curve 1: OE exhaust with OE or low restriction air filter and the stock ECU.
Curve 2: Slip-on mufflers with low restriction air filter and a stage 1 ECU.
Curve 3: Complete free flow exhaust system with low restriction air filter and stage 1 ECU.
Curve 4: No base curve for fuel delivery adjustment only.
Control box stays attached to the motorcycle and measures 2 3/4" long x 1 3/4" wide x 3/4" high.
Instructions included. Made in the U.S.A.

Part#:MU82739 - Fits VRSC (V-Rod) 2002/Later ... $236.60 including shipping*

Closed-loop system programs the fuel injection system while you ride.
No wrenching, no dyno tuning, no need for constant adjustments – just hook it up and go.
Increases horsepower and torque by as much as 20% along with a decrease in emissions and fuel consumption.
Works with 80”, 88”, 95”, 103”, EVO, Twin Cam and V-Rod engines.
Connects directly to the factory ECU and utilizes all the factory OEM sensors.
Fully automatic dynamic tuning with a Robust Platinum II oxygen sensor.
Coordinates the factory ECU calibration, updated calibration and race-tuned calibrations.
Coordinates the factory ignition and fuel tables by utilizing the factory preset calibration tables.
Operates using the Alpha-N rpm and throttle position method.
Over-molded, sealed, surface-mounted circuit board design.
Installs by connecting just six wires and the O2 sensor.
Made in the U.S.A.

Part#: DS1020-0216 For 02-06 V-Rod ... $518.95 includng shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.