Steel Thunder Custom Cycles Motorcycle Parts store for Harley-Davidson and custom bikes.

You can navigate Steel Thunder Custom Cycles' webpage from this bar on any shopping page. Home Page Site Map Catalogs Contact Us Sportster Section

WELCOME TO OUR NEWLY IMPROVED SITE!

Pay with PayPal:  You don't need an account with PayPal, you can also use your credit card.  Or call us to use your credit card or to pay by check.  Whatever works best for you!  PLEASE NOTE:  We Only Ship Within the U.S.A.

SHOPPING:

Solution Graphics

Secured by SSL - an authentic COMOCO site.

Protected by Copyscape Duplicate Content Detection Software

Body

Books/Manuals

Catalogs

Control

Drivetrain/ Transmission

Electrical

Engines

Exhaust

Frames & Swingarms

Front End

Fuel : Gas/Air/Oil

General Merchandise

BIKER GIFT GIVING MADE EASY: Gift Suggestions/Gift Certificates/Gifts

Handlebar/Control

Ignition

Lighting &  Licence plates

Mirrors

Posters of motorcycles

Rolling Chassis Kits

Saddlebags/Luggage

Seats & Sissy Bars

Security

Shocks

Sportster Section

Tools/Shop/Hardware

Trailers/Ramps/Wheel Chocks

Wheels/Tires

Wide Glide Conversion/ Triple Trees

Wide Tire Kits

OTHER PAGES:

Credentials

Contact Us

F.A.Q. (frequently asked questions)

Find Our Store/Shop

Site Map & Search

Tech & Info Section

Terms

Photos, Fun & Links

Steel Thunder Custom Cycles
3418 Teagues Road
Marshfield, MO 65706
417-468-2326

***

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

Energize an event and create some buzz as your company's or organization's raving fans wear your company logo. With your own  custom temporary tattoo you'll see grown adults acting like kids as they interact with your brand. 500 Temporary Tattoos Made Just For You - Under $69 US

SAVE 5% & GET FREE SHIPPING WHEN YOU USE THIS COUPON CODE:

FUNTATS

Safe, waterproof temporary tattoos with your custom design! Good for events, parties, promotion and more! FUN!

 

Stabilizers and Rubbermount Engine & Swingarm Mounts

For FL, FXR, XL & Other Rubbermount Motor Models

For other motor mounts click here.

Ultraride Stabilizing System for FLT 93/Later rubbermount motor models.

ULTRA RIDE STABILIZING SYSTEM FOR BIG TWIN - Terry Components

When you're cruising down the highway at 70 plus or cornering and your bike feels like it's " WAGGING" its tail, should you back off? Go faster? Or eliminate the possibility of high speed wobbles by simply installing Terry Components " Ultra Ride" Stabilizing system.
• At high speeds there is nothing worse than feeling unstable. The "Ultra Ride" Stabilizing System will dramatically free your bike of those vibrations, and the feeling that something is loose or moving around in the rear suspension.
• The "Ultra Ride" Stabilizing System connects the power train to the frame by adding stabilizing links that allow the drive train to move freely in a forward motion and eliminates the possibility of moving side to side.
• Manufactured from T6-6061 Billet Aluminum, all Stainless Steel Turn buckles and Hardware.
• Includes instructions.
• Fits FLT Models 1993/Later. Made in the U.S.A.

Part#:M72290 - Ultra Ride Stablizing System for FLT 93/L ... $351.86 including free shipping*

Progressive Suspension's Chassis Stabilizer Link Kit four Touring Harley-Davidson motorycles stops that "tail wagging" feeling on the newer bikes.

Larry put this on his Road King, and said it handled MUCH better!

CHASSIS STABILIZER LINK KIT FOR TOURING MODELS -
Progressive Suspension


Stabilizer has a forged steel construction with precision rod end bearings.
Motor/swingarm assembly remains aligned with chassis without any unnecessary vibrations.
Easy to install stabilizer does not change ground clearance.

Part#:M72291 - Chassis Stabilizer - Fits Touring models 1993/Later ... $192.76 including shipping*

Velva Ride Front Engine Mount for Big Twin, Black.

Black or Polished (not shown).

VELVA RIDE® FRONT ENGINE MOUNT FOR BIG TWIN - V Thunder

Reduce transmitted engine to frame vibration by 20% just by replacing your OEM front mount with this improved version. The Velva Ride system utilizes a powder coated or natural finish 1/2" thick aluminum engine plate and two separate isolator mounts that are made from a semi-soft Urethane. Installation is as simple as replacing the OE mount and does not require realignment. Instructions are included. Fits all FLT models 1980/Later and all FXR models 1982/Later and Buell models 1991 thru 2002. (Replaces HD 16207-79B & 96210-80). Black or Natural finish. Made in U.S.A.

Part#:CC30130 - Black Velva Ride Engine Mount ... $111.83 including shipping*

Part #: CC30131 - Polished (not shown) Velva Ride Engine Mount ... $123.98 including shipping*

For Front and Top of 80/08 FXR, FLT and Top Dyna Models.

Velva-ride motor mount stabilizer from V-Thunder for FXR, FLT and Dyna.

Velva-ride motor mount stabilizer cuts vibration.

Velva-ride shown on motorcycle.

VELVA-RIDE™ MOTOR MOUNT STABILIZER - V-Thunder

Body contains a plunger encased in a specially formulated urethane to absorb vibration.
Available in a standard or polished stainless steel finish.
Sold each or in pairs.
Made in the U.S.A.

NOTE:
For Front and Top of 80-08 FXR, FLT and Top Dyna Models

Part #:CC30134 - Polished (pr.) ...$272.46 including shipping*

Part #:CC30135 - Polished (ea.) ...$147.77 including shipping*

Part #:CC30132 - Standard (pr.) ...$194.96 including shipping*

Part #:CC30133 - Standard (ea.) ...$107.15 including shipping*

Sta=Bo rear fork stabilizer bushings.

0129467

Sta-Bo rear fork stabilizer bushings for FLht & FLHR 02/L

0129468

REAR FORK STABILIZER BUSHINGS FOR BIG TWIN 1980/LATER - Sta-Bo

Made of Delrin, which is a lightweight low friction and wear resistant plastic.
Removes lateral movement of swingarm.
Improves handling and dampening.
Aligns engine transmission unit in frame.
Includes instructions.  Made in the U.S.A.

Part#:M29467 - Sta-Bo - Fits FLHT, FLHR & FXR 1980/2001 ... $193.69 including shipping*

Part#:M29468 - Sta-Bo - Fits FLHT & FLHR 2002/Later $101.85 including shipping*

Rear Fork End Caps for FXR
REAR FORK END CAPS FOR FXR FRAMES - Kraft-Tech

These Rear Fork End Caps are TIG welded and machined from case hardened steel. They feature a durable glossy black powder coat finish and are ready to install. Made in the U.S.A.

Part#:M29532 - Powder Coated Caps, Fits FXR 1982/1994 (Replaces HD# 47825-81 & 47826-81) ...  $115.21 including shipping*

For 04/08 Sportster

Chrome MOtor MOunt kit for 2004-2008 rubbermount sportsters.

CHROME MOTOR MOUNT KIT - Drag Specialties

Chrome plated steel construction.
Includes two lower front mounts and front cylinder head mount.
Hardware included.
Replaces OEM #47480-04.

For 04-08 XL (Sportster)

Part #: DS0933-0012 - For 04-08 XL. ... $89.95 including shipping*

Please note: This is a special order item. While most items ship the same or next business day, this item will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

For 04/08 Sportster

Chrome Motor Mount Cover for rubbermount Sportster XL

Hotop motor mount cover hides mount and choke cable bracket on Sporster.

MOTOR MOUNT COVER FOR XL - Hotop Designs/Drag Specialties

Chrome cover hides unsightly top motor mount and choke cable bracket.
Gives a unique custom look.
Installs easily with existing OEM hardware.

Part #DS0933-0015 - For 04-08 XL (Sportster) ... $69.95 including shipping*

Please note: This is a special order item. While most items ship the same or next business day, this item will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

*FREE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship only within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Sorry, we do not ship to Puerto Rico.

Prefer to call in your order to Steel Thunder? Call toll-free: 1-866-889-7828. 9-5 CST M-F.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

3418 Teagues Road

Marshfield, MO 65706

417-468-2326

We hope you'll come visit us ... we'd love to see your ride!

 

 

With God All Things are Possible!

 

Copyright 2002-2010 Steel Thunder Custom Cycles©